ActiGraph ACTITRAINER Uživatelský manuál stáhnout pdf (Strana 45)

45 | Page

15 W. Main St. Pensacola, FL 32502 tel 850.332-7900 fax 850-332-7904

Stop Date & Time

This column displays the stop date and time programmed on the device. This is set during initialization and is used to

align the file lengths for multiple devices during large longitudinal studies.

Filter

The “Filter” column displays the on-board accelerometer filter setting for initialized devices (Normal or Low-Frequency-

Extension). See

Setting Device Parameters for details. This column is not applicable for GT3X+ devices as no on-board

filtering is performed.

Axis Enabled

The “Axis Enabled” column indicates which axes are being sampled and stored. 1 – only vertical (Axis 1); 2 – vertical and

horizontal (Axes 1 and 2); 3 – vertical, horizontal, and perpendicular (Axes 1, 2, and 3).

Modes

The “Modes” column displays icons representing the data channels that the device is set to log (if initialized). The icons

and their meanings are interpreted in Table 15.

Mode/Channel

Icon

Interpretation

Flash LED Mode Enabled

(LED flashes periodically to indicate device

is active). See

Recharging and LED

Decoding for more details.

Step counting enabled. Indicates that the

device is recording step counts per epoch.

See

Steps for more details.

Inclinometer enabled. Indicates that the

device is recording orientation data which

will later be interpreted as sitting, standing,

lying, or off. See

Inclinometer for more

details.

Lux (ambient light) sensor enabled.

Indicates that the device is collecting light

data. See

Lux (Ambient Light) for more

details.

Table 15 – Mode/Channel Icon Definitions

More Info

The button in the “More Info” column is for debug purposes by ActiGraph support and should not be required to

operate the device(s).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 93 94

Žádné komentáře

ActiGraph ACTITRAINER Uživatelský manuál Strana 45